UMP Distributor Cap – DC-425

Distributor Cap

SKU: 00656791161125 Category:

Description

United Distributor Caps

United Motor Products manufactures and distributes high quality OEM replacement ignition and engine management products. Their products cover a wide range of industries including Automotive, Marine, Industrial and Agricultural markets. United Motor Products has provided these industries with quality products for over 30 years. Included in their product offerings are a ?green? battery cable program, ignition, engine management and sensor product lines. All products are made of the highest quality premium materials, to provide maximum performance and longevity in the toughest conditions.

Features & Benefits

  • Premium grade raw materials go into every distributor cap
  • PBT reinforced thermoplastic is filled with 20-30% nylon to ensure a high dielectric strength distributor cap that promotes an extended lifecycle
  • 100% solid brass or aluminum contact points are used to maintain the conductivity needed and provide the proper voltage flow requirements to keep the ingition system functioning to OEM specifications
  • Carbon contact point to rotor spring resists wear, to extend the service life of distributor cap
  • Where applicable, a vent is built into the cap, to allow ozone to escape, there by preventing corrosion build up inside the cap

Additional information

Weight 0.43 lbs
Dimensions 5 × 4.18 × 5 in
Brand Code

HLMH

Item Grade

OEM Standard

Application Summary

1983-1988 Buick Skyhawk (Liter: 1.8, 2.0 & Engine(ci): 112, 122 & Cylinder: 4 & Block: L & Bore(in): 3.34, 3.39 & Bore(mm): 84.8, 86.0 & Stroke(in): 3.13, 3.39 & Stroke(mm): 79.5, 86.0); 1983-1988 Oldsmobile Firenza (Liter: 1.8, 2.0 & Engine(cc): 1998 & Engine(ci): 112, 122 & Cylinder: 4 & Block: L & Bore(in): 3.34, 3.39 & Bore(mm): 84.8, 86.0 & Stroke(in): 3.13, 3.39 & Stroke(mm): 79.5, 86.0); 1987-1989 Pontiac Grand Am (Liter: 2.0 & Engine(ci): 122 & Cylinder: 4 & Block: L & Bore(in): 3.39 & Bore(mm): 86.0 & Stroke(in): 3.39 & Stroke(mm): 86.0); 1983 Pontiac J2000 (Liter: 1.8 & Engine(ci): 112 & Cylinder: 4 & Block: L & Bore(in): 3.34 & Bore(mm): 84.8 & Stroke(in): 3.13 & Stroke(mm): 79.5); 1984-1985 Pontiac J2000 Sunbird (Liter: 1.8 & Engine(ci): 112 & Cylinder: 4 & Block: L & Bore(in): 3.34 & Bore(mm): 84.8 & Stroke(in): 3.13 & Stroke(mm): 79.5); 1986-1991 Pontiac Sunbird (Liter: 1.8, 2.0 & Engine(ci): 112, 122 & Cylinder: 4 & Block: L & Bore(in): 3.34, 3.39 & Bore(mm): 84.8, 86.0 & Stroke(in): 3.13, 3.39 & Stroke(mm): 79.5, 86.0)